You can do a DIY drop ceiling installation by following a few easy steps. First, you should measure the width of the room, and add 4 inches to this measurement. Using a chalk line, measure the length of the room and draw a line parallel to it at each corner. Then, nail the wall angle brackets along the chalk line. Use 6d common nails to fasten them. You can cut the brackets with a hacksaw or tin snips.
Drop Ceiling Installation – How to Do it Yourself
Next, you should measure the length and width of the grid openings and make necessary adjustments. You might have to cut tiles to fit the space, but this is not a difficult task. Start by lifting the tiles above the framework, then tilt them down so that they will be even with the grid runners. You may need to cut the edges of the tiles with a utility knife. Then, you can install the ceiling panels. This is the most straightforward part of the dropped ceilings installation process, and you can do it without the help of a professional.
Lay the ceiling tiles and floor boards. Before installing the ceiling, you should make a plan of where the tiles should go. It’s important to avoid fitting too many tiles in one room, so make sure to measure correctly. It’s also important to mark the angles of the walls. Try to keep them symmetrical so you’ll have a clean look after installation. If you’re going to hang the tiles above a wall, make sure you use a square grid with grid runners.